chiliGREEN P4TSE - Manual (Page 9)

7
!" Same DRAM bus width (x8 or x16)
!" Both either single-sided or dual-sided
Matched in both Channel A and Channel B memory channels
!" Populate symmetrical memory slots
Optimal platform performance with Dual Channel, DDR400, matched DIMMs
!" Fully loaded configurations can be single or double sided DIMMs
!" Lightly loaded configurations need to be double sided DIMMs
When not using DDR400, best performance obtained with
!" Symmetrical DIMM population and matched double-sided DIMMs
!" Lightly loaded configuration
Dual Channel Configuration Table
•
Dual Channel Configuration Table
DIMM Slot DDRA1 DDRA2 DDRB1 DDRB2 System
Density
Lightly
Loaded
Config
128MB --
1GB
128MB --
1GB
256MB --
2GB
Lightly
Loaded
Config
128MB --
1GB
128MB --
1GB
256MB --
2GB
Fully Loaded
Config
128MB --
1GB
128MB --
1GB
128MB --
1GB
128MB --
1GB
512MB --
4GB
DRAM Access Time: 2.5V Unbuffered/ no registered (without ECC) DDR SDRAM
PC2100/ PC2700/ PC3200 Type required.
DRAM Type: 128MB/ 256MB/ 512MB/ 1GB DIMM Module (184 pin)