chiliGREEN P4TSE - Manual (Page 5)

3
English
P4TSE Features
A. Hardware
CPU
Provides Socket-478.
Supports the Intel Pentium 4 processor to 3.06GHz+.
Front Side Bus at 400/533/800MHz.
Supports Hyper-Threading Technology.
Supports Northwood and Prescott CPU. (Willamette not supported)
Chipset
North Bridge: Intel 865PE.
South Bridge: Intel ICH5.
Main Memory
Supports one or two 64-bit wide DDR data channels with 1 or 2 DIMMs
per-channel.
Available bandwidth up to 3.2GB/s(DDR400) for single-channel mode and 6.4GB/s
(DDR 400) in dual channel mode.
Supports 128-Mb, 256-Mb, 512-Mb DDR technologies.
Supports only x8, x16, DDR devices.( Does not support registered DIMMs and
double-sided X 16 DIMMs)
Supports four bank devices.
Maximum memory size is 4GB.
Super I/O
Chip: ITE IT8712.
Low Pin Count Interface.
Provides the most commonly used legacy Super I/O functionality.
Environment Control initiatives,
- H/W Monitor
- Fan Speed Controller
- ITE's "Smart Guardian" function
Slots
Five 32-bit PCI bus master slots.
One CNR slot.
One AGP 4X/8X slot.
On Board IDE
Supports four IDE disk drives.
Supports PIO Mode 5, Bride Mode and Ultra DMA 33/66/100 Bus Master Mode.
Supports 2 Serial ATA (SATA) ports.