chiliGREEN K8NHA Grand - Manual (Page 19)

K K 8 8 N N H H A A G G r r a a n n d d
19
5.3 H OW RAID W ORKS
RAID 0:
The controller “stripes” data across multiple drives in a RAID 0 array
system. It breaks up a large file into smaller blocks and performs disk
reads and writes across multiple drives in parallel. The size of each
block is determined by the strip size parameter, which you set during
the creation of the RAID set based on the system environment.
This technique reduces overall disk access time and offers high
bandwidth.
Features and Benefits
Drives: Minimum 1, and maximum is up to 6 or 8.
Depending on the platform.
Uses: Intended for non-critical data requiring high data
throughput, or any environment that does not require fault
tolerance.
Benefits: provides increased data throughput, especially for
large files. No capacity loss penalty for parity.
Drawbacks: Does not deliver any fault tolerance. If any drive
in the array fails, all data is lost.
Fault Tolerance: No.