English, 7 mb intelligent tweaker(m.i.t.), Cpu smart fan control – chiliGREEN GA-8I945P Duo Graphic User Manual
Page 46: Cpu smart fan mode, Cpu clock ratio, C.a.m
GA-8I945P Dual Graphic(-R) Motherboard
- 46 -
English
CPU Smart FAN Control
Disabled
Disable this function.
Enabled
When this function is enabled, CPU fan will run at different speed depending on
CPU temperature. Users can adjust the fan speed with Easy Tune based on
their requirements. (Default Value)
CPU Smart FAN Mode
This option is available only when CPU Smart FAN Control is enabled.
Auto
BIOS autodetects the type of CPU fan you installed and sets the optimal CPU
Smart FAN control mode for it. (Default Value)
Voltage
Set to Voltage when you use a CPU fan with a 3-pin fan power cable.
PWM
Set to PWM when you use a CPU fan with a 4-pin fan power cable.
Note: In fact, the Voltage option can be used for CPU fans with 3-pin or 4-pin power cables.
However, some 4-pin CPU fan power cables are not designed following Intel 4-Wire fans PWM
control specifications. With such CPU fans, selecting PWM will not effectively reduce the fan
speed.
2-7
MB Intelligent Tweaker(M.I.T.)
Incorrect using these features may cause your system broken. For power end-user use only.
CMOS Setup Utility-Copyright (C) 1984-2005 Award Software
MB Intelligent Tweaker(M.I.T.)
CPU Clock Ratio
(Note)
[16X]
C.A.M
(Note)
[High]
Robust Graphics Booster
[Auto]
C.I.A. 2
[Disabled]
CPU Host Clock Control
[Disabled]
x CPU Host Frequency (Mhz)
200
x PCI Experss Frequency (Mhz)
Auto
System Memory Multiplier
[Auto]
Memory Frequency (Mhz)
533
DIMM OverVoltage Control
[Normal]
PCI-E OverVoltage Control
[Normal]
FSB OverVoltage Control
[Normal]
CPU Voltage Control
[Normal]
Normal CPU Vcore
1.3875V
KLJI: Move
Enter: Select
+/-/PU/PD: Value
F10: Save
ESC: Exit
F1: General Help
F5: Previous Values
F6: Fail-Safe Defaults
F7: Optimized Defaults
Item Help
Menu Level`
CPU Clock Ratio
(Note)
This setup option will automatically assign by CPU detection.
The option will display "Locked" and read only if the CPU ratio is not changeable.
C.A.M
(Note)
High
Set clock ratio for frequency-locked CPU to High. (Default value)
Low
Set clock ratio for frequency-locked CPU to Low.
(Note) This item will show up when you install a processor which supports this function.