chiliGREEN GA-8I945P Duo Graphic - Manual (Page 20)

GA-8I945P Dual Graphic(-R) Motherboard - 20 -
English
Step 2: Graphics Cards Driver Setting
For detailed information about how to install the graphics card driver, please refer to the user's manual for
your graphics card.
Step 1-2: In order to enable the Quad View function correctly, you
must connect four different monitors to all four video
output ports (D-Sub/DVI). If you want to install only one
graphics card to your system and install it in the
PCIE_16_1 slot, set the Init Display First item under
the Advanced BIOS Features menu in BIOS Setup to
PEG; set this item to PEG2 if the card is installed in the
PCIE_16_2 slot.
Enabling Quad View Mode--
Step 1: Install your graphics cards to PCIE_16_1 and PCIE_16_2
slots.
Step 1-1: Observe the steps in "1-6 Installation of Expansion
Cards" and install two similar graphics cards to
PCIE_16_1 and PCIE_16_2 slots.