chiliGREEN GA-8I945P Duo Graphic - Manual (Page 39)

BIOS Setup - 39 -
English
CPU Hyper-Threading
Enabled Enables CPU Hyper Threading Feature. Please note that this feature is only working
for operating system with multi processors mode supported. (Default value)
Disabled Disables CPU Hyper Threading.
Limit CPUID Max. to 3
Enabled Limit CPUID Maximum value to 3 when use older OS like NT4.
Disabled Disables CPUID Limit for windows XP. (Default value)
No-Execute Memory Protect (Note)
Enabled Enables No-Execute Memory Protect function. (Default value)
Disabled Disables No-Execute Memory Protect function.
CPU Enhanced Halt (C1E) (Note)
Enabled Enables CPU Enhanced Halt (C1E) function. (Default value)
Disabled Disables CPU Enhanced Halt (C1E) function.
CPU Thermal Monitor 2 (TM2) (Note)
Enabled Enable CPU Thermal Monitor 2 (TM2) function. (Default value)
Disabled Disable CPU Thermal Monitor 2 (TM2) function.
CPU EIST Function (Note)
Enabled Enable CPU EIST function. (Default value)
Disabled Disable EIST function.
Init Display First
This feature allows you to select the first initiation of the monitor display from which card when you
install a PCI card and a PCI Express VGA card on the motherboard.
In order to enable the Dual Graphic function correctly, you have to connect the display cable to the
graphic card in the PCIE_16_2 slot and set this item to PEG2.
PCI Set Init Display First to PCI VGA card.
PEG Set Init Display First to PCI Express VGA card (Slot1). (Default value)
PEG2 Set Init Display First to PCI Express VGA card (Slot2) card.
(Note) This item will show up when you install a processor which supports this function.