English – chiliGREEN GA-7VT600-p-l User Manual
Page 54
- 50 -
GA-7VT600-P(-L) Motherboard
English
)
)
)
)
) CPU Host Frequency (MHz)
100MHz
Set CPU Host Clock to 100MHz~132MHz.
133MHz
Set CPU Host Clock to 133MHz~165MHz.
166MHz
Set CPU Host Clock to 166MHz~200MHz.
200MHz
Set CPU Host Clock to 200MHz~254MHz.
)
)
)
)
) PCI/AGP Frequency (MHz)
The values depend on CPU Host Frequency(Mhz).
)
)
)
)
) DRAM Clock (MHz)
Please set DRAM Clock according to your requirement. (Default value: Auto)
If you use DDR266 DRAM module, please set "DRAM Clock(MHz)" to "133-DDR266". If you use
DDR333 DRAM module, please set "DRAM Clock(MHz)" to "166-DDR333". If you use DDR400 DRAM
module, please set "DRAM Clock(MHz)" to "200-DDR400".
Incorrect using it may cause your system broken. For power End-User use only!
)
)
)
)
)CPU OverVoltage Control
Increase CPU voltage may get stable for Over_Clock. But it may damage to CPU when enable this
feature.
Auto
Supply voltage as CPU reguired. (Default value)
+5% / +7.5% / +10%
Increase voltage range as user selected.
)
)
)
)
)AGP OverVoltage Control
Increase AGP voltage may get stable for Over_Clock. But it may damage to AGP Card when enable this
feature.
Auto
Supply voltage as AGP Card reguired. (Default value)
+0.1V ~ +0.3V
Set AGP voltage from 1.6V~1.8V.
)
)
)
)
)DIMM OverVoltage Control
Increase DRAM voltage may get stable for Over_Clock. But it may damage to DRAM module when
enable this feature.
Auto
Supply voltage as DRAM module reguired. (Default value)
+0.1V ~ +0.3V
Set DIMM voltage from 2.6V~2.8V.