CHAMPION CCT Table System - Manual (Page 19)

11
Item Part Description Qty.
No. No.
CCT90, CCT180 - Cradle and Drive Assembly
1 332883 CRADLE, CCT 90 (Metal frame only) 1
2 332906 CRADLE, CCT 180 (Metal frame only) 1
3 100746 BOLT, HEX HD. 3/8-16 X 1-1/4" SST 2
4 113860 BEARING AND HOUSING ASSEMBLY 1
5 106407 WASHER, LOCK 3/8" SPLIT, SST 2
6 109010 NUT, GRIP 3/8" W/NYLON INSERT, SST 2
7 206939 SHAFT, PIVOT 1
8 314351 STIFFENER, SHAFT 1
9 107589 WASHER, LOCK 1/2" SPLIT SST 1
10 100747 BOLT, HEX HD. 1/2-13 X 1" SST 1
11 100736 BOLT, HEX HD., 1/4-20 X 3/4" SST 2
12 106482 WASHER, LOCK 1/4" SPLIT SST 2
13 332344 ROD, DRIVE E44/54, CCT 16" LG. SST 2
14 332921 ROD DRIVE, E64/84 CCT 13" LG. SST 2
15 202381 ROLLER, CROSSHEAD BRASS 1
16 107089 NUT, JAM 1/2-13 SST 1
17 104882 WASHER 2
18 202392 PIN, CROSSHEAD ROLLER 1
19 104584 NUT, PLAIN 1/2-13 HEX SST 1
20 332746 ANGLE CROSSHEAD ROLLER SUPPORT CCT 1
21 113692 BOLT, HEX HD., 3/8" X .875" X 5/16-18 A/R
22 204513 PAWL A/R
23 206345 BUSHING, PAWL A/R
24 100142 NUT, GRIP 5/16-18 SST A/R
25 100735 BOLT, HEX HD., 1/4-20 X 5/8" SST A/R
26 108938 SPACER A/R
27 100141 NUT, GRIP 1/4-20 SST A/R
NOTE:
CCT 90 Cradle Assembly uses 4 pawl assemblies (Items 21-27)
CCT 180 Cradle Assembly uses 8 pawl assemblies (Items 21-27)