CHAMPION EBD-48 Rack and Flight Mounting Instructions - Manual

For Rack and Upright Conveyor Dishwashers
v.32911
10-1/2" 28-1/2"
25"
36"
28-1/2"
Side
Front
39"
2" x 4" x 36" Lg. Board
Left to Right Operation Shown
Forklift
Mounting
Hardware
Top of unload section
Left to Right Operation Shown
1. The blower dryer weighs 225lbs.
Lift with forklift or 4 persons.
2. Mount the blower dryer on the top
of the exit end of the dishwasher.
3. Lift the blower dryer off the pallet.
4. Position (2) 2" x 4" x 36" Lg.
boards on the top of the
dishwasher as shown in Figure 1.
5. Lift the blower dryer above
the exit end of the dishwasher.
6. Align the blower dryer with the
dishwasher blower dryer opening
as shown in Figure 2.
7. Lower the blower dryer to
approximately 2" above
the dishwasher.
8. Carefully slide the board from
underneath the blower as you ease
the control cabinet end of the blower
dryer into place.
9. Ease the other end of the blower
dryer in place as you remove the
other board.
10. Secure the blower dryer to the
dishwasher with supplied
5/16-18 x 3/4" bolts, flats
and lockwashers.
Figure 1.
Figure 2.