CHAMPION EBD-48 Rack Mounting Instructions - Manual

For Rack Conveyor Dishwashers
Form No. xxxxxx
10-1/2" 28-1/2"
25"
28-1/2"
Side
Front
39"
Left to Right Operation Shown
Forklift
Mounting
Hardware
Top of blower tunnel
Left to Right Operation Shown
ATTENTION:
The blower dryer weighs 225lbs.
Lift with forklift or 4 persons.
To Mount the blower dryer on the top
of the exit end of the blower tunnel:
1. Lift the blower dryer off the pallet.
2. Lift the blower dryer above
the exit end of the dishwasher.
3. Align the blower dryer with the
dishwasher blower dryer opening
as shown in Figure 2.
4. Lower the blower dryer into position
over the blower dryer tunnel and
carefully transfer the blower dryer
over the opening in the tunnel.
5. Apply a bead of sealastic sealer
provided in the kit around the
blower dryer.
6. Secure the blower dryer to the
dishwasher with supplied qty. 6
5/16-18 x 3/4" bolts, flats
and lockwashers.
Figure 1.
Figure 2.