Normal operation – Carter-Hoffmann MDPM4 User Manual
Page 6

6
NORMAL OPERATION
CAUTION:
HOT SURFACE
Inner surfaces of the unit
will be very hot during and
after operation. Avoid
touching the cabinet when
loading or removing
product.
Alarm Reset
Button
Temperature
Set Button
1. The power switch is located at the base of the cabinet, underneath the
door. Turn the power switch ON. Preheat cabinet for 30 minutes. When
the cabinet is turned on, the air heater will operate until the cabinet
reaches the air temperature setpoint. The display will read the actual
cabinet temperature. The heat “ON” light will illuminate when the cabi-
net temperature is below the air temperature setpoint. The temperature
display will flash alternately “LO” and the actual cabinet air temperature
until it reaches the low temperature alarm setpoint.
2. After preheat, load cooked, boxed pies (or other hand-held items) into
the cabinet.
NOTE: The interior Product Caddy has a reserve storage area, separated
by wires in the upper portion of the caddy. This reserve area is intended to
provide additional product while a new batch is being cooked. Holes be-
neath the door provide visual indication of low product level in the cabinet.
3. Cabinet dispenses items from the bottom, underneath the door. Simply
grasp the item and pull out.
4. When cabinet is not in use, turn power off.
NOTE: This cabinet must be cleaned daily. Instructions can be found on
page 8.
165
Heat “ON”
Light
Temperature
Display
Up/Down Arrow
Buttons
CONTROLLER
Controller
Location
Power
Switch
MDPM2 MDPM4
Reserve
Storage
Area
Product
Caddy