Setting up the controller, Ustomer, Nits – Carbolite 3216CC Indicator User Manual
Page 6: Crolling, 4 setting up the controller
Basic Operation
6
MC23-GB
– v1.00
4 Setting up the controller
Before using the controller (or during its lifetime) certain parameters may have to be set,
depending on specific requirements. To do this the controller must be set to supervisor level
(Level 2) see section 3.1
4.1
Customer ID.
A furnace or oven identification number can be entered if required. This maybe used to
identify one of many units, for production or quality control systems.
Press scroll
until the display shows
ID <customer ID>. Using the Up
Down
enter
your own identification number. This can range from 1-9999.
4.2
Units
Press scroll
until the display shows
units <Display Units>. Using the Up
or Down
select the required units.
Mnemonic
Description
nonE
No units (Default °C)
°C
Celsius
°F
Fahrenheit
°K
Kelvin
PErc
%
4.3
Scrolling Text
If at any time the scrolling text is not required.
Press and hold the Page
for three seconds until “GOTO” is displayed
Press Scroll
until the display shows.
TEXT <ENABLE/DISABLE SCROLLING TEXT>
Use the Up
Down
to select
ON or OFF