BT Diverse 2010 - Manual (Page 15)

12
Making and
transferring calls
between handsets
If you have multiple handsets registered
with the base, the Diverse 2010 enables
two handsets to talk to each other on
an internal ‘intercom’ call, while a third
handset can be on an external call.
To page a handset from the base station
To locate handsets that are away from
the base station.
• Press the GREY button on the base.
All handsets registered with the base
will ring for 30 seconds.
• To stop paging press the GREY button
again.
Or
•
Press the PHONE button on the
handset.
If you have additional handsets, you can
make internal intercom calls between
the handsets.
To make an internal intercom call to
another handset
• Press the INT button. Display shows
your handset number.
• Enter the number of the handset you
want to call. The handset will ring.
• To end the call, press the END CALL
button, or replace the handset on the
base.
To receive an internal call
• When the handset rings, the display
flashes
INT plus the number of the
handset calling you, –
2 in this
example.
• Either press the PHONE button, or
simply lift the handset off the base
station to receive the call.
To make an internal call to all
handsets
You can call all handsets registered to a
base station simultaneously.
• Press the INT button. Display shows
your handset number.
• Press the
✱
button. All handsets will
ring. The first handset to answer will
take the call.
• To end the call, press the PHONE
button or replace handset on the base.
INT
If all available handsets are engaged on an
internal call and an external call arrives, a
‘call waiting’ signal is given. To take the
call, either replace the handset on the base,
or press END CALL.You can accept the
new call when you hear the phone ring.
INT
✱