BT Diverse 2010 - Manual (Page 13)

10
Using your Diverse 2010
On/Off and Protected
modes
The handset can be set to one of three
different modes. Your handset’s display
will indicate which mode it is currently
in, as shown below.
OFF
Phone calls cannot be made and the
handset does not respond to incoming
calls. Nothing is shown on the display.
To switch on, press and hold down the
PWR button until the display is activated.
ON
You can make and receive calls.
To switch off, press and hold down the
PWR button until the display goes blank.
PROTECTED
The setting stops you accidentally
operating the handset’s keypad when
carrying it around. You can still receive
incoming calls but you cannot make
outgoing calls.
To switch to PROTECTED when the
handset is ON
• Press and release the PWR button.
• Press and release the PWR button
again to switch off protected mode.
PWR
If the handset is beyond radio distance of
the base station, the
symbol f lashes.
You cannot make or receive calls until the
handset is brought back within range.
The
symbol also f lashes for a while after
power-up until the handset automatically
registers to the base.