Cambridge SoundWorks T100 Tower Loudspeakers - Manual (Page 3)

Introduction
Thanks for choosing a Newton Series loudspeaker.
The T100 features the finest drivers, precision internal
crossover circuitry and an elegant enclosure design.
The Product Development Team at Cambridge
SoundWorks believes there is no better combination of
audiophile-level attention to detail and reasonable cost.
AFTER UNPACKING
Store the shipping carton and packing material for
future transport needs.
CONTENTS
A) One Loudspeaker
B) Two Support Stands
C) Six Stand Bolts
D) Four threaded posts (“spikes”)
E) Four disc feet
F) Four lock nuts
G) Four soft foot pads
Also necessary:
A philips screwdriver (no.2, preferably)
to install the stands
Two lengths of speaker wire
INSPECTING FOR DAMAGE
Examine the speaker system carefully for shipping
damage. If there is any, do not install or use the
system. Return the speaker to the store where you
made the purchase or call Cambridge SoundWorks at
1-800-FOR-HIFI (1-800-367-4434) for assistance.
INTRODUCTION
1
A
C
F
B
G
E
D