Advanced mode – CalDigit S2VR Duo Manual User Manual
Page 12
11
Advanced Mode
1. Select S2VR (Box with serial #)
2. CLICK on Configure RAID
3. CLICK on Advanced tab
Video: By changing the settings in this
section, your S2VR manager will
automatically provide a calculated data
rate for the selected settings.
Audio: as above, select the desired
settings, and the audio data rate will be
calculated.
Storage:
Your S2VR manager will calculate the
approximate capacity of the 2 sections
above.
Your S2VR manager will also provide a
suggested RAID type for your
project/task.
Important Note: The numbers that appear overall, are for reference only, the actual
configuration settings depends on your system performance.