CalDigit USB 3 card for desktop User Manual
Page 7
Installing the CalDigit SuperSpeed PCI Express Card
To install the CalDigit SuperSpeed PCI Express Card, please make sure the
computer is turned off. Unplug the power cord and wait 5 to 10 minutes allowing the
computer’s internal components to cool.
Open up the computer. If you are using a MacPro, please hold the side access panel and lift
the latch on the back of the computer. Remove the access panel. If you are using a PC, please
make sure there is an available PCIe slot and remove any necessary screws.
Power Cord Socket
Power Cord Plug
1
2
07