C.B.S. Scientific MGU-602T - Manual (Page 9)

www.cbsscientific.com Tel# 858-755-4959 8
2. Align safety cover over the unit and carefully
attach, so not to disturb samples. If using
Flip lid MGU close lid and attach power
leads.
3. Connect the leads to the power supply,
matching the color-coded red to red and
black to black. See Section 4.1 for
recommended power conditions. Begin
separation by electrophoresis.
3.3 Removing the Gel
1. Turn the power supply off and disconnect
the leads from the power supply.
2. Remove the safety cover from the unit, by
placing thumbs on white posts next to red &
black connectors, then pushing down while
pulling up with fingers under lid. DO NOT
pull on power cords. If using flip lid, simply
remove power leads and carefully open flip
lid.
3. Gently lift the gel tray from the unit. Always wear gloves, eye protection
and protective clothing if buffer and/or gel contains Ethidium Bromide. Ethidium Bromide is a
powerful mutagen, gloves, eye protection and protective clothing should always be worn when
handling the gel or buffer solutions. See Material Data Safety Sheets.
4. View separated fragments under UV light, using proper protection for eyes and skin (see
manufacturer’s instructions).