BASELINE Lift BL409 User Manual
Page 15
15
6. Operating Instructions & Lift Maintenance
Insure this manual along with all operation, inspection and
maintenance instructions are delivered to the
owner/user/employer
LIFT OPERATION: Before lifting a vehicle, insure all operators are qualified, have
been trained and are following all safety instructions. Read and follow the ALI
"Lifting It Right" manual
included with the lift
. Always use the "Vehicle Lifting Points"
reference guide when lifting a vehicle
.
Insure all materials stay up to date »»
(see example of SAE J2184 standard below)
Insure that every vehicle will be securely positioned on the lift. When using air/hydraulic rolling
jacks, always use vehicle manufacturer's recommended lifting points (see picture below).
Never allow anyone under the lift when raising or lowering. Always insure
mechanical safety locks are completely engaged on all four columns before
proceeding under the lift or a vehicle.
Controls on the powerpack and crossbeam perform the following functions:
Push button on power unit: raises the lift.
Safety Release Handle: retracts or releases safety locks at all four columns. This handle
(along with the "DOWN HANDLE") must be pressed and held during the entire lowering
procedure.
Down handle on power unit: lowers the lift.
Note: Before lowering the lift you should raise it slightly to remove pressure from safety locks
allowing them to disengage completely.