BASELINE Lift BL409 - Manual (Page 13)

13
NOTE:
This lift does not require bolting to the floor, but if you choose
the option to anchor the lift to the floor please follow the
detailed instructions and criteria below.
FOUNDATION and ANCHORING REQUIREMENTS:
Lift should only be installed on level concrete floors with no
more than 3º of slope and a minimum of 4 inches (102mm) and
3000 psi (20.7MPa) concrete that has been aged a minimum of
30 days. A qualified person should be consulted to address
seismic loads and other local requirements.
Do not install the lift on asphalt or outdoors.
Maintain a 6’’ minimum distance from any slab edge or seam.
Hole depth should be a minimum of 4’’.
When use shims, MAKE SURE shim thickness not exceed 1/2’’
when using the anchors with the lift.