BASELINE Lift BL209BP - Manual (Page 4)

4
UNLOADING PROCEDURE and LIFT PACKAGE CONTENTS
For your information:
All lift components are grouped together in one package held at each end by steel frames.
Unpacking Procedure:
When the lift arrives on site:
 If possible have the lift unloaded in the installation area.
 Check for freight damage and report immediately to the trucking company who delivered
the lift.
 Check for missing parts and report immediately to the factory.
Main Components include:
 Power Side Column and Carriage Assembly – 1 pc (c/w equalizing cable, cylinder
assembly, lifting chain and roller all pre-installed)
 Opposite Side Column and Carriage Assembly – 1 pc (c/w equalizing cable, cylinder
assembly, lifting chain and roller all pre-installed)
 Arms – 4 pc (c/w arm restraint gear assemblies)
 Powerpack Assembly – 1 pc
 Cable Cover
Accessory and Hardware Box includes:
 Baseplate Shims (6mm - 3mm - 1mm assortment)
 Anchor Bolt Assemblies - 10 pc
 Arm Pins – 4 pc
 Rubber Stack Pad Assembly – 4 pc
 Honda Adapters – 2 pc
 Stack Pad Adapter (3”) – 4 pc
 Stack Pad Adapter (6”) – 4 pc
 Hydraulic Hose w/ Fittings – 2 pc (1 long and 1 short)
 Steel Floor Plate – 1 pc
 Fittings Box (bolts, washers, nuts, screws, cable ties, etc.)
 Owner’s Manual