Operating instructions and lift maintenance – BASELINE Lift BL209BP User Manual
Page 11
![background image](/manuals/555343/11/background.png)
11
15. Do not place any vehicle on the lift at this time. Cycle the lift up and down several
times to insure latches click together and all air is removed from the hydraulic system.
To lower the lift, latch releases must be manually released. Latches will automatically
reset once the lift ascends approximately 17" from base. If latches click out of sync,
tighten the cable on the one that clicks first.
Insure this manual along with all operation, inspection and maintenance
instructions are delivered to the owner/user/employer
Final Check Procedure of Assembled Lift
Check hydraulic oil level in reservoir. Confirm hydraulic connections are tight with no leaks
Confirm that both columns are level and properly shimmed with all anchor bolts torqued
to 150 ft.-lbs.
(204Nm). Confirm lift stability
Confirm that all electrical components have been wired properly and are operational
Confirm that all cables are adjusted properly
Confirm safety locks and arm restraints are functioning properly
Lubricate all lubrication points