Autoquip HORIZONTAL BALL SCREW - Manual (Page 17)

1. Mechanical actuators have a maximum lifting capacity (see “Specifications” section).
Lifting loads exceeding the rated capacity of the lift may result in excessive wear and
damage to the actuator or equipment structure.
WARNING!
NEVER stand, sit or ride on the lift!
2. This lift is designed for in-plant applications and is furnished with constant pressure
pushbutton controls. Actuating the "UP" button will energize the lift actuator and
cause the lift to rise.
3. When the desired height or upward travel of the platform is attained, removing the
operator’s finger from the “UP” button will cause upward movement to stop.
4. To lower the lift, activate the "DOWN" button, which reverses the lift actuator motor
and causes the lift to lower.
5. When the desired height or downward travel of the platform is attained, removing
the operator’s finger from the “DOWN” button will cause downward movement to
stop.
CAUTION!
OPERATING INSTRUCTIONS
Do not continue to press a button if the lift is not raising or if it has reached
the fully raised position. To do so may result in permanent damage to the
lift.
17