Autoquip GATES SWING - Manual (Page 36)

ROUTINE MAINTENANCE
DANGER !
To avoid personal injury or death, all maintenance procedures
described in this section should only be performed by qualified
service personnel.
DANGER !
To avoid personal injury or death, do not operate this equipment
with substandard, defective, or missing parts. Contact a local
FREIGHTLIFT service representative if a deficiency is found.
WARNING !
To avoid serious injury or death, GUARDS, INTERLOCKS, and
SAFETY DEVICES must be restored to correct operation when
installing parts or making repairs.
1. Listen for unusual noises. Isolate and check for the cause. Repair if required.
2. Check that the platform carriage is hitting the upper limits. Make sure that the
platform carriage is lined up with the upper floor. Adjust the stop bolts, if required.
3. Check proper functionality of gate status switches and adjust if needed.
4. Check for proper functionality of interlock and adjust if needed.
5. Check for broken or cracked welds.
5. Check that all anchors are in place and secure.
36