Pt-500 submersible pressure transducer, Robust from top to bottom, 1/2” npt fitting – APG PT-500 Slave Submersible datasheet User Manual
Page 4: Csa class 1, div 1, Field adjustable, Durable transducer face, High strength cable laser welds, Built-in surge and lightning protection, Automatic temp. compensation, Patented re-usable cage
Automation Products Group, Inc. brings
you the highest quality submersible on
the market.
The PT-500 is the only transducer that
can be adjusted in the field, and the only
one that offers a removable cage. The
high quality build is simply unmatched.
Give us a call at (888) 525-7300 to learn
more.
PT-500 Submersible Pressure Transducer
Robust from Top to Bottom
1/2” NPT Fitting
Mount to a conduit pipe
Hang from a steel wire
Saves cable from wear
Avoid interference with pumps
CSA Class 1, Div 1
Safe for operation around flammable gas
Field Adjustable
Adjust zero point with simple magnet
Magnet provided with the sensor
Don’t have to send to the manufacturer for
simple adjustments
Durable
Transducer Face
Can be handled freely
Will not be damaged from simple touch
State-of-the-art MEMs transducer
Custom made to our spec
High tensile strength with Kevlar
Safe transducer ventilation
High Strength Cable
Laser Welds
Superior laser welds
Extremely durable
No cracks or leaks
Built-In Surge and
Lightning Protection
No surge-protector necessary
Protection built right into the sensor
IEC 61000-4-5 compliant
Automatic
Temp. Compensation
Embedded temperature sensor
Automatic compensation
Patented
Re-Usable Cage
Only re-usable cage on the market
Keeping the cage saves money on
replacement sensors
APG
R
Automation Products Group, Inc. | www.apgsensors.com | 888-525-7300
APG
R
Automation Products Group, Inc.
www.apgsensors.com
tel. 888.525.7300
4
®
*Kevlar
®
is a registered trademark of E.I. du Pont de Nemours and Company