Fig. 11a, Fig. 11b – Anchor 5-STAR SOLID SAFETY POOL COVER User Manual

Page 11

FIG. 11A

Drilling/Setting of 3/8” Drop-in Anchors

1) Drill a hole into base material to the depth of embedment (see information above) required. Do not over drill hole. Blow the

hole clean of dust and other material. Insert the drop-in anchor into the hole and tap flush with surface. Using setting tool, set

drop-in anchor by driving the tool into the drop-in anchor until the shoulder of the tool is seated against the drop-in anchor.

EMBEDMENT

3/8” Drop-in Anchor

Drill Diameter - 1/2”

Minimum Depth - 1 7/8”

FIG. 11B

RAISED WALL

CABLE

CLAMPS

CABLE

CLAMPS

EYEBOLT

END

HOOK

END

CABLE

COVER

SNAP

WEATHER FLAP

CABLE

ANCHOR BOLT

RUNNING CABLE THROUGH

IN-LINE HOLES ON SLOTTED

CABLE ANCHOR BOLTS

ATTACH CABLE TO EYEBOLT ON TURNBUCKLE

ATTACHING SNAP TO CABLE

TURNBUCKLE

EXTENDED

APPROX. 18”

EYEBOLT

FIG. 11C

FIG. 11E

FIG. 11D

CABLE

ANCHOR

BOLT

SLOTTED

CABLE

ANCHOR

BOLT