Bryant Quantum Plus CENTRAL AIR CONDITIONER - Manual (Page 3)

3
Air Cleaners and
Humidifiers
Systems equipped with electronic or
mechanical air cleaners and/or humidifi-
ers offer the added benefits of having the
air continuously cleaned year-round, and
humidified during the winter season.
Ventilation
A system equipped with a heat or
energy recovery ventilator offers the
advantage of exhausting stale air from the
home and allowing fresh air in from the
outdoors while minimizing heat loss.
Zoning
Your system may also be equipped with a
zoning system which allows individual
control over the temperatures of separate
areas of your home.
Check Condensate Drain
Your air conditioner will remove humid-
ity from your home during the cooling
season. After a few minutes of operation,
you should be able to see water trickle
from the condensate drain of the cooling
coil. Check this occasionally to be sure the
drain system is not clogged. Of course,
don’t expect to see much drainage if you
live in a very dry environment.
When Not To Use Your Unit
Do not operate your unit when outdoor
temperatures are below 55°F.
OPERATING YOUR
AIR CONDITIONER
The operation of your air conditioning
system is controlled by the indoor ther-
mostat. You simply adjust the thermostat
and it maintains the indoor temperature at
•
•
•
•
•
Fig. 2—Bryant Non-Programmable Thermostat
MODE FAN RESET/FILTER
RESET FILTER BUTTON
RESTARTS THE TIMER
THAT CALCULATES
THE NEXT AIR FILTER
CHANGE OR CLEANING
FAN BUTTON CHOOSES
BETWEEN ON OR AUTO
FAN OPERATION
LCD READOUT DISPLAYS
CURRENT ROOM TEMPERATURE,
DESIRED ROOM TEMPERATURE,
UNIT MODE SETTING,
AND FAN MODE SETTING
MODE BUTTON SELECTS
BETWEEN OFF, HEAT,
COOL, AND AUTO OPERATION
UP AND DOWN
BUTTONS INCREASE
OR DECREASE THE
DESIRED TEMPERATURE
SETTINGS
Thermostat
RESET FILTER BUTTON
RESTARTS THE TIMER
THAT CALCULATES
THE NEXT AIR FILTER
CHANGE OR CLEANING
HOLD BUTTON MAINTAINS
THE CURRENT TEMPERATURE
AND OVERRIDES PROGRAMMED
TEMPERATURE CHANGES
UNTIL RESET
SET TIME
BUTTON
FAN BUTTON CHOOSES
BETWEEN ON OR AUTO
FAN OPERATION
LCD READOUT DISPLAYS
CURRENT ROOM TEMPERATURE,
DESIRED ROOM TEMPERATURE
OR OUTDOOR TEMPERATURE,
UNIT MODE SETTING,
FAN MODE SETTING,
AND TIME OF DAY
MODE BUTTON SELECTS
BETWEEN OFF, HEAT, COOL,
AND AUTO OPERATION
PROGRAM BUTTONS
FOR PROGRAMMING
HEATING/COOLING
CYCLES
UP AND DOWN
BUTTONS INCREASE
OR DECREASE THE
DESIRED TEMPERATURE
SETTINGS
Programmable
Thermostat
HOLD RESET FILTER SET TIME/TEMP
FAN END CHANGE DAY
MODE PROGRAM COPY PREVIOUS DAY
Fig. 3—Bryant Programmable Thermostat