10 save changes to your settings, 11 reset the phone to its factory defaults, Hanges to – Allworx 9102 Phones User Manual
Page 31: Ettings, Eset the, Hone to, Actory, Efaults
Phone Guide – 9102 / 9112
300 Main Street • East Rochester, NY 14445 • Toll Free 1-866-ALLWORX • 585-421-3850 • www.allworx.com
© 2007Allworx Corp. All rights reserved. Allworx is a registered trademark of Allworx Corporation. All other names may be trademarks or registered
trademarks of their respective owners.
Revised: October 10, 2007
Page 27
7.10 Save Changes to Your Settings
Normally, you are prompted to save the changes you have made. You may, however, manually want to save
the changes.
1. Select the soft key that corresponds to CONFIG on the screen.
2. Highlight
Save Settings.
3. Press
the
Select button.
4. Select
the
YES soft key to save any changes OR select NO to cancel changes made.
5. Press
the
Exit soft key.
7.11 Reset the Phone to Its Factory Defaults
Warning: Do not reset your phone to its factory defaults unless instructed by your System
Administrator.
1. Select the soft key that corresponds to CONFIG on the screen.
2. Highlight
Set Factory Defaults.
3. Press
the
Select button.
4. Select
the
YES soft key to restore the factory defaults OR select NO to keep the Configuration as is.
5. Phone automatically reboots.