Allen&Heath ME-U - Manual (Page 16)

User Guide – AP9209_1 16 ALLEN & HEATH
Manual names and stereo links
If your source does not broadcast the
channel data then you can manually enter
names and stereo linking for the 40 ME-1
channels.
Tick and then untick the (All) box in the ‘Use
Received’ column.
Click a Name box and type in a name with up
to 6 characters. This is the name that will be
displayed on the ME-1 mixer screen when its
key is assigned for ‘Default’ name.
Tick the Stereo Link box for channels you
wish to link, for example left and right of a
stereo keyboard. Type a name for the linked
channels into the top name box. The lower
name box is disabled on linked channels.
Clearing names and links
Click Defaults to reset all manual names to
their number 1-40 and all stereo links off. This
also sets all channels to use received data.
You can use this to reset names and links as
a starting point for entering manual names. In
this case remember to untick the ‘Use
Received’ boxes.
Manually editing received names
You can use a combination of received and
manual data.
This example shows names and stereo link
status received from the input source, for
example iLive or GLD.
The names are those assigned at the source
mixing console.
Here, CH9 and 10 are linked for stereo
operation at the ME-1 mixers. In this case
only one name is used.
This example shows how you can edit some
of the received names and stereo status to
suit your ME personal mixing requirements.
Here, CH9 and 10 are manually edited to
combine the two overhead drum mics as a
stereo pair at the ME-1 mixer.
Untick the two ‘Use Received’ boxes.
If you make changes to the settings click
‘Save’ to confirm or ‘Cancel’ to restore the
previous settings.