Introduction, Check the packing contents – Allen&Heath iDR10 User Manual
Page 5

iDR10 User Guide
5
Introduction
This is the user guide for the Allen & Heath iDR10 ‘MixRack’. We recommend that you
read this fully before starting. Included is information on installing, connecting and
operating the unit. Whilst we believe the information in this guide to be reliable we do
not assume responsibility for inaccuracies. We also reserve the right to make changes in
the interest of further product development.
We are able to offer further product support through our worldwide network of approved
dealers and service agents. You can also access our Web site (www.allen-heath.com)
for information on our company and its pedigree, our full product range and our design
philosophy. To help us provide the most efficient service please keep a record of your
unit serial number, and date and place of purchase to be quoted in any communication
regarding this product. The serial number is located on the rear panel.
For further information on using the iLive system please refer to:
iLive System Reference guide
AP6526
iLive
Getting
Started
Guide
AP7260
Allen & Heath Resource CD
AP4742
Allen & Heath web site
www.allen-heath.com
Firmware Release Notes
Downloadable from web site
Help file within system firmware
Check the packing contents
Retain the product packing should you need to ship the product in future. You should find the
following components:
1x iDR10 MixRack. Depending on the order
configuration, the MixRack is either shipped
in a carton or a touring grade, shock
mounted flightcase.
1x MODULE EXTRACTOR TOOL AA6869.
This is fitted in clips at the rear of the
flightcase or packed in the carton.
1x IEC MAINS LEAD with moulded plug. Check that the plug
is suitable for connection to your local mains supply.
iDR10/n where n = mains voltage 120 (USA), 220 (EU), 240
(UK)
1x CAT5 CABLE 1.8m RJ45 EtherCon connections.
Part number AH7001. Connects the iDR10 to the iLive
Surface or another MixRack. Note that the second cable
required is shipped with the iLive Surface.
DOCUMENTATION including the User Guide AP6525, Safety
Sheet AP3345, Registration Card AP3594, and sticker
AP4943.
AL
LE
N&
H
EA
TH
iD
R-
64
MI
X E
NGI
NE