Allen&Heath iDR10 - Manual (Page 17)

iDR10 User Guide 17
Using the iDR10
There are several ways the iDR10 can be used within an iLive system. It is one of many component
options that may be configured to satisfy a host of demanding audio mixing applications. We
recommend that you visit the Allen & Heath web site for information on the full range of iLive
components available. You can also download additional application drawings which illustrate the
versatility of iLive in satisfying many basic and advanced applications.
Refer also to the iLive Getting Started Guide AP7260 and the iLive System Reference Guide AP6526.
Further information on the latest features is available in the Release Notes which come with each
firmware release. Check our web site to download the latest version of iLive firmware.
The following pages illustrate some of the iDR10 applications. They are based on preconfigured
‘template’ Show memories which can be recalled from the Surface UTILITY / Configuration / Show
Manager screen. They give you a good starting point by configuring a recognisable classic
architecture and surface layout. You can edit these and name and store your customised
configurations as User Shows.
H1-8 = AUX1-8
D1-4 = MTX1-4
D5-8 = ST MTX1-2
C5-8 = MAIN
ALLEN&
H
EA
TH
iD
R-6
4
MI
X EN
GIN
E
A
B
D
C
A B C D E F G H I J
C1-2 = AUX7-8
C3-4 = ST AUX1
A1-8 = CH 57-64 FOH LOCAL AUDIO
I1-2 = ST AUX1
I3-4 = -
I5-8 = MAIN1-4
J1-4 = MTX1-4
J5-6 = ST MTX1-2
A1-G8 = I/P 1-56
STAGE INPUTS STAGE OUTPUTS
FOH_8fx_LR Load Show
8x GRP = 4m 2st
18x AUX = 8m 1st 8FX
MAIN = LR
8x MTX = 4m 2st
CONFIG
APPLICATION EXAMPLE - STANDARD SINGLE RACK SYSTEM
64 inputs, 32 mixes, 8 effects.
ETHERNET
CAT5
ETHERSOUND
CAT5
ESA IN
NETWORK
HEADPHONES and TALKBACK
2 x CAT5 cables to stage
FOH
iDR10
ESA OUT
NETWORK
AUDIO CLOCK = INTERNAL
ESB CONFIG = MASTER
CH SOURCE = LOCAL INPUTS
Set options using TOUCHSCREEN = MIXRACK / Mixer Pref / Audio Sync Networks
1
iLive