Step 9, Step 10 – Aladdin Light Lift ALL1000-CM-240V User Manual
Page 6
STEP 9
Shim and adjust ALL1000 so that winch cable hangs plumb through center of hole in top contact plate on
ceiling box. See Diagram E. Look up at ceiling box from floor level to verify cable is plumb.
Never install the ALL1000 where the cable is not plumb through the center of the ceiling box. This could
interfere with the automatic shutoff system and could cause the chandelier to fall, which could cause
death, personal injury, and/or property damage.
Wood Screws
Washers
STEP 10
Fasten ALL1000 to floor joists using wood screws (part A) and washers (part B) included in parts bag. See
Diagram F.
Never install the ALL1000 without properly fastening it to the floor joists. This could interfere with
the automatic shutoff system and could cause the chandelier to fall, which could cause death, personal
injury, and/or property damage.
Confirm winch cable
hangs plumb through
center of hole in
top contact plate on
ceiling box.
Diagram E
Diagram F
View from Floor Level