Aladdin Light Lift ALL200-CM-240V - Manual (Page 4)

STEP 5
Attach the 1/2” conduit connector on ceiling box to bottom of conduit assembly. Once completely inserted,
tighten set screw on conduit connector. See Diagram B.
Never attach or adjust the conduit assembly improperly. This could interfere with the automatic shutoff
system and could cause the chandelier to fall, which could cause death, personal injury, and/or property
damage.
1/2” Conduit Connector
STEP 6
Tighten temporary 2.3Kg weight to fixure coupler on bottom contact plate. Make sure jam nut on weight is
tight.
Never install or operate an ALL200 before securing the temporary 2.3Kg weight to the fixture coupler.
This could cause the temporary weight to fall, which could cause death, personal injury, and/or property
damage.
Diagram B