AirLive WN-5000PCI - Manual (Page 43)

this window will be activated or deactivated respectively.
WMM - Power Enable WMM power saving mode to save energy and lets your battery live longer.
Save Enable
Setting... Click this button to select the WMM data type which will suppress the function of
power saving. When this kind of data is transferring, power saving function will be
disabled. Available data types are AC_BK (Background / Low Priority), AC_BE
(Best Effort), AC_VI (Video First), and AC_VO (Voice First).
Direct Link Enable or disable direct link setup (DLS) function.
Setup Enable This function will greatly improve the data transfer rate between WMM-enabled
wireless devices. Please click ‘Apply’ button on the right of this check box after you
check or uncheck this box, so corresponding settings in this window will be
activated or deactivated respectively.
MAC Address Input the MAC address of another WMM-enabled wireless device you wish to
establish a direct link here, then click ‘Apply’ to add this MAC address to DLS
address table.
Timeout Value Input the timeout value of this WMM-enabled direct link wireless device. If the
wireless device is not responding after this time, it will be removed from DLS table.
Tear Down If you want to remove a specific wireless device from DLS table, select the device
and click this button to remove it.
After you finish the settings, click ‘OK’ to close configuration utility.
WN-5000 PCI User’s Manual
40