AirLive WN-301USB - Manual (Page 41)

35 WN-301USB User’s Manual
Rescan:
Click to scan for WPS-enabled APs (perform a site survey).
Information:
Select a found WPS-enabled access point, then click “Information” to display that AP’s details in a
pop-up window.
PIN Code:
The WPS PIN Code of this network adapter is required for connection.
SSID (lower panel):
The service set identifier of the connected WPS- enabled access point.
MAC Address:
The MAC address of connected WPS-enabled AP.
Authentication (lower panel):
The authentication type of connected WPS-enabled access point.
Encryption (lower panel):
The encryption type of the connected WPS- enabled access point
Detail:
Click to show details of a selected WPS-enabled access point.
Connect:
Click to connect to a WPS-enabled access point on the list.
Rotate:
Click to connect to next WPS-enabled access point on the list.
Disconnect:
Click to disconnect from a connected WPS-enabled access point. If there are other wireless access
points in the profile, the last one will be connected; if there’s nothing in the profile, the adapter will
connect to any unsecured wireless AP nearby.