AirLive WH-9100MESH - Manual (Page 22)

4.1.3 Enter WH- 9100MESH configure screen
The default IP of LAN port is 192.168.15.1. This IP can be change after you enter the configure screen.
Please refer to section 5.5 to understand how to change IP. After you change IP, the IP of LAN will
change as the first one that your new DHCP IP range.
On your computer, pull up a browser window and put the default URL ( https://192.168.15.1 ), or new IP
for the WH-9100MESH Local LAN in the address line.
Note: be sure that you use the https prefix, not http
Note: For WH-9100MESH, be sure that the operation mode you choose. The URL is
https://192.168.15.1 for AP mode and is https://192.168.16.1 as Gateway mode.
4.1.4 Enter WH-9100MESH Gateway mode configure screen
If the unit is 9100MESH and set up its operation mode as Gateway mode, the URL change as
https://192.168.16.1
Figure 4-1 Log in IP screen
Key in https://192.168.15.1 , or
https://192.168.16.1 for 9100MESH set up as
Gateway mode
4.1.5 Username and Password
Figure 4-2 Login in username and password screen
You will be asked for your user name
and password. The default is “airlive”
with the password “airlive” to give full
access for setup configuration. (This
password is case-sensitive)
After you key in the username and
password, please read the terms and
conditions and check the checkbox “I
agree to the terms and conditions
below” then click the “Sign In” button” to
continue configuration. You can change
the username and password as you want after you enter configuration screen.
4.2 Forget username, password and IP
How can you do if you had changed username, password and IP but you forget it? You can find there is
!
!
AirLive WH-9100-MESH User’s Manual 21