AirLive WFP-101U v2 - Manual (Page 21)

smoothly run in your system. It will not cause abnormal behaviors or unsafe
on your system.
16. Choose if you want to run the “MFP Manager” utility automatically when
Windows starts. It is recommended to enable the setting.
17. The default wireless setting is “Auto” mode. The MFP Server will detect if
the MFP Server is connected to a wired LAN network through the attached
Ethernet cable. If yes, it will work in wired network. To enable the wireless
setting, please remove the Ethernet cable. For more detailed information
about wireless setting, please refer to Section 6.8.
13 AirLive WFP-101U v2 User’s Manual