AirLive Traveler3G II - Manual (Page 63)

59
AirLive Traveler 3G II User’s Manual
 Protocol: TCP or UDP or both.
 Use Rule#
For source or destination IP address, you can define a single IP address
(4.3.2.1) or a range of IP addresses (4.3.2.1-4.3.2.254). An empty implies all IP
addresses.
For source or destination port, you can define a single port (80) or a range of
ports (1000-1999). Add prefix "T" or "U" to specify TCP or UDP protocol. For
example, T80, U53, U2000-2999, No prefix indicates both TCP and UDP are
defined. An empty implies all port addresses. Packet Filter can work with
Scheduling Rules, and give user more flexibility on Access control. For Detail,
please refer to Scheduling Rule.
Each rule can be enabled or disabled individually.
Click on “Save” to store what you just select or “Undo” to give up