AirLive Traveler3G II - Manual (Page 62)

AirLive Traveler 3G II User’s Manual
58
 Packet Filters
Packet Filter includes both outbound filter and inbound filter. And they have
same way to setting.
Packet Filter enables you to control what packets are allowed to pass the
router. Outbound filter applies on all outbound packets. However, inbound filter
applies on packets that destined to Virtual Servers or DMZ host only. You can
select one of the two filtering policies:
1. Allow all to pass except those match the specified rules
2. Deny all to pass except those match the specified rules
You can specify 8 rules for each direction: inbound or outbound. For each rule,
you can define the following:
 Source IP address
 Source port
 Destination IP address
 Destination port