AirLive POE-FSH8PW - Manual (Page 33)

4. Web Management
AirLive POE-FSH8PW User’s Manual
28
Example 4:
The RX bandwidth number of the port 5~ port 8 is set to 50, 60, 70, 80 respectively, and
Speed base is set to “high”. The real bandwidth comes from the formula of 512Kbps*50,
512Kbps*60, 512Kbps*70 and 512Kbps*80 respectively. After the “update” button is
executed, the real bandwidth will show up in RX fields.
The limitation of the bandwidth control
The actual bandwidth should be less than the cable link speed. For 100Mbps link speed,
the bandwidth setting should be less than 196 if the bandwidth is set to “high”. For 10Mbps
link speed, the bandwidth setting should be less than 20 if the bandwidth base is set to
“high”.
Setting the bandwidth to “0” will make the switch running at the full speed.
The warning message will show up if bandwidth setting is higher than maximum rate
(100Mbps).