AirLive POE-FSH8PW - Manual (Page 23)

4. Web Management
AirLive POE-FSH8PW User’s Manual
18
4.3 Get Into the Web management
After you have properly configured the computer and switch’s IP, you can get into the web
management by the following steps:
Step 1. Open the Internet Explorer
Step 2. Enter the switch’s IP address in the Address field and press enter.
Step 3. When prompt for User’s name and Password, enter the following
information:
„ User’s Name: admin
„ Password: airlive
You should see the following welcome screen after the process is completed:
Menu Bar
On the left side of the screen is the Menu bar where you and click to configure
management functions. Most configuration functions are under the “Administrator” menu.
We will explain the menu items in the remaining section of this chapter.
Top Switch Image
The switch’s image on the upper portion of the screen gives the quick overview of the port
connection status. When a port is plugged in, the switch’s image will show a “plug” on the
corresponding port. Click on a port will show the quick port status.