AirLive P-203N - Manual (Page 43)

6.1 Introduction
The print server is available for TCP/IP printing by Unix LPD (Line
Printer Daemon) protocol. The LPD protocol originated with Unix release is
based on the BSD version of Unix and supported under most versions of Unix.
This chapter explains how to configure the print server for TCP/IP
operation, and how to modify configuration files on your Unix system to allow
printing to the print server. The configuration examples in this manual follow
the syntax for BSD based Unix systems. Please refer to the related system
documentation for the correct syntax of your systems.
To configure the print server for LPD printing, perform the procedures
below:
1. Enable Print Server’s TCP/IP Support.
2. Set up Print Server’s IP address.
3. Verify Print Server’s IP Address.
4. Configure remote LPD printing on the host.
5. Print a test page.
In the next sections, we will describe these five procedures step by step.
38 AirLive P-203N User’s Manual