AirLive IP-1000R v2 - Manual (Page 16)

3. Configuring the IP-1000R v2
AirLive IP-1000R v2 User’s Manual 12
3. Select the network card for your LAN.
4. Select the appropriate radio button - Obtain an IP address from a DHCP Server or
Specify an IP Address, as explained below.
 Obtain an IP address from a DHCP Server
This is the default Windows setting, and it is recommended to use it. By default, the
IP-1000R v2 will act as a DHCP Server.
Restart your PC to ensure it obtains an IP Address from the IP-1000R v2.
 Specify an IP Address
If your PC is already configured, check with your network administrator before making the
following changes.
5. The Default Gateway must be set to the IP address of the IP-1000R v2. To set this:
 Click the Advanced button on the screen above.
 On the following screen, click the Add button in the Gateways panel, and enter the
IP-1000R v2’s IP address, as shown in below.
 If necessary, use the Up button to make the IP-1000R v2 the first entry in the
Gateways list.