AirLive ePhone-1000S - Manual (Page 16)

- 16 -
Protocol Settings
To Access the Audio Settings Menu
Press 1, 2, 3, 4, # ( Hold the “#” key)
Enter a [Password]
Press 1, 2, 3, 4 and press Enter→ Network Settings appears
Press Vol.- (volume down button)→ enter the [Protocol Setting].
To Configure Service Settings
Press Enter twice in the [protocol settings] prompt→ the Service option appears.
¾
Press SPD/Hold, “0” and Enter to disable service.
¾
Press SPD/Hold, “1” and Enter to enable service.
To Configure the Proxy Server registrar location.
Press Enter multiple times in the [protocol settings] prompt
Enter the [service address]
Press SPD/Hold
Enter the IP address of the registrar proxy server (XXX*XXX*XXX*XXX) and press
Enter
.
To Enable STUN for NAT pass-through when using SIP protocol:
At the [protocol settings] prompt of press Enter multiple times→ the [nat traversal]
prompt appears.
Press SPD/Hold→ press “4” to enable STUN and press Enter
Press Enter again→ [nat addr] appears
Press SPD/Hold
Enter the IP address of the STUN server (XXX*XXX*XXX*XXX) and press Enter.
To Configure the AirLive ePhone-1000 Registration Type
At the [protocol settings] prompt, press Enter once
Press Vol. + (the volume up button) multiple times→ [local type] appears