AirLive AirVideo-100v2 - Manual (Page 59)

4. Appendix
AirLive AirVideo-100v2 User’s Manual 54
4 4. Appendix
Troubleshooting
Q: Why can’t I connect to AirVideo-100v2’s Web Management even the
wireless show I had connected to the AirViedo-100’s SSID.
A:
Do a Ping test to make sure that the AirVideo-100v2 is responding.
Go to Start > Run.
1. Type cmd.
2. Press OK.
3. Type ipconfig to get the IP of default gateway.
4. Type “ping 192.168.1.1”. Assure that you ping the correct IP Address
assigned to the AirVideo-100v2. It will show four replies if you ping
correctly.
Ensure that your Wireless Adapter is working, and that all network drivers are
installed properly. Network adapter names will vary depending on your specific
adapter. The installation steps listed below are applicable for all network
adapters.
1. Go to Start > Right click on “My Computer” > Properties.
2. Select the Hardware Tab.