AirLive Air3GII - Manual (Page 47)

3. Making Configuration
AirLive Air3GII User’s Manual 43
3.3.4. MAC Control
MAC Address Control allows you to assign different access right for different users and to
assign a specific IP address to a certain MAC address.
1. MAC Address Control: Check “Enable” to enable the “MAC Address Control”. All of
the settings in this page will take effect only when “Enable” is checked.
2. Connection control: Check "Connection control" to enable the controlling of which
wired and wireless clients can connect with this device. If a client is denied to
connect with this device, it means the client can't access to the Internet either.
Choose "allow" or "deny" to allow or deny the clients, whose MAC addresses are
not in the "Control table" (please see below), to connect with this device.
3. Association control: Check "Association control" to enable the controlling of which
wireless client can associate to the wireless LAN. If a client is denied to associate to
the wireless LAN, it means the client can't send or receive any data via this device.
Choose "allow" or "deny" to allow or deny the clients, whose MAC addresses are
not in the "Control table", to associate to the wireless LAN.
Click on “Save” to store your settings or click “Undo” to give up the changes.