AirLive Air3GII - Manual (Page 32)

3. Making Configuration
AirLive Air3GII User’s Manua l 28
6. Connection ID: Optional. Input the connection ID if your ISP requires it.
7. Maximum Idle Time: The time of no activity to disconnect your L2TP session. Set it
to zero or enable “Auto-reconnect” to disable this feature. If Auto-reconnect is
enabled, this device will connect with ISP automatically, after system is restarted or
connection is dropped.
8. Connection Control: There are 3 modes to select:
Connect-on-demand: The device will link up with ISP when the clients send
outgoing packets.
Auto Reconnect (Always-on): The device will link with ISP until the connection is
established.
Manually: The device will not make the link until someone clicks the connect-button
in the Status-page.
9. Maximum Transmission Unit (MTU): Most ISP offers MTU value to users. The
default MTU value is 0 (auto).
3.1.2. DHCP Server
1. DHCP Server: Choose either Disable or Enable. If you enable the DHCP Server
function, the following settings will be effective.
2. IP Pool Starting/Ending Address: Whenever there is a request, the DHCP server
will automatically allocate an unused IP address from the IP address pool to the
requesting computer. You must specify the starting / ending address of the IP
address pool.