AirLive Air3GII - Manual (Page 30)

3. Making Configuration
AirLive Air3GII User’s Manua l 26
3. My IP Address and My Subnet Mask: The private IP address and subnet mask
your ISP assigned to you.
4. Gateway IP and Server IP Address/Name: The IP address of the PPTP server and
designated Gateway provided by your ISP.
5. PPTP Account and Password: The account and password your ISP assigned to
you. If you don't want to change the password, keep it blank.
6. Connection ID: Optional. Input the connection ID if your ISP requires it.
7. Maximum Idle Time: the time of no activity to disconnect your PPTP session. Set it
to zero or enable “Auto-reconnect” to disable this feature. If Auto-reconnect is
enabled, this device will connect with ISP automatically after system is restarted or
connection is dropped.
8. Connection Control: There are 3 modes to select:
Connect-on-demand: The device will link up with ISP when the clients send
outgoing packets.
Auto Reconnect (Always-on): The device will link with ISP until the connection is
established.
Manually: The device will not make the link until someone clicks the connect-button
in the Status-page.
9. Maximum Transmission Unit (MTU): Most ISP offers MTU value to users. The
default MTU value is 0 (auto).