AiM SmartyCam ver 1.22 - Manual (Page 11)

SmartyCam
User Manual
Release 1.22 – firmware version 1.03.10
11
www.smartycam.com
Chapter 2 – Data sampled by SmartyCam stand alone/slave
As mentioned above, according to its working mode, SmartyCam provides different
information.
In Stand Alone mode, SmartyCam gets data from the integrated GPS and three-axial
accelerometer:
• position;
• GPS speed;
• acceleration
• lap time;
• distance;
• track mapping.
When connected to an AIM logger (EVO3 Pro/Pista, EVO4, MXL Strada/Pista/Pro05 or
MyChron4) or an ECU (via ECU bridge), SmartyCam can visualize in graphical overlay:
• all info acquired in Stand Alone mode;
• all info coming from the vehicle ECU;
• all info sampled by the AIM logger (RPM, more speeds, LCU-ONE Lambda value,
engaged gear, temperatures, pressures, etc…).
When Connected to an RPM Bridge gets data from the integrated GPS and three-axial
accelerometer as well as engine RPM:
• position;
• GPS speed;
• acceleration
• lap time;
• distance;
• track mapping;
• engine RPM.
PLEASE NOTE: for further useful information check:
• www.aim-sportline.com website download area to know which ECUs are supported
by AIM loggers and their connection/communication protocols;
• Race Studio Configuration user manual to understand how to configure AIM
loggers, AIM Bridges included;
• each AIM logger user manual.