AiM Data Key - Manual (Page 4)

Data Key
User Manual
Release 1.01
3
www.aim-sportline.com
2
How Data Key downloads data
To download data stored in MyChron4 connect Data Key to the logger. Firmware version
check is made automatically, selected working mode is followed and then data download
procedure is activated.
Available options are three:
• data download starts if data stored in MyChron4 memory have never been
downloaded on that Data Key;
• data stored in MyChron4 memory have already been downloaded on that Data
Key;
• there are no data in MyChron4 memory.
Once data have been downloaded it is possible to transfer them on a PC following this
procedure:
• connect
Data Key to the PC USB port
• run Race Studio 2;
• press “Download data”: this panel appears:
As can be observed it allows to manage downloaded data and Data Key memory.